
Hey there!: Some links on this page are affiliate links which means that, if you choose to make a purchase, as an Amazon Associate we earn a small commission at no extra cost to you. We greatly appreciate your support!
No | Product | Score | Action |
---|---|---|---|
1 | Chip Quik SMDLTLFP Solder Paste Sn42/Bi57.6/Ag0.4 No-Clean Lead-Free Low Temperature Melts 138C 281F | 9.8 | Buy On Amazon |
2 | DIY Solder Soldering Paste 10cc Flux Grease RMA223 RMA-223 for Chips Computer Phone LED BGA SMD PGA PCB Repair Tool | 9.8 | Buy On Amazon |
3 | No Clean Lead Free Solder Paste 15 Grams | 9.6 | Buy On Amazon |
4 | Chip Quik SMD291AX50T3 Solder Paste in jar 50g (T3) Sn63/Pb37 no clean | 9.6 | Buy On Amazon |
5 | BGA Activated Rosin Solder Paste Tin Rosin-Based Flux Paste Cream for Soldering Rework Station Circuit Board PCB BGA SMD Soldering Repair (80g) | 9.4 | Buy On Amazon |
6 | MG Chemicals 4902P Sn42Bi57Ag1 Low Temperature Solder Paste T3 | 8.8 | Buy On Amazon |
7 | Chipquik Tack Flux no clean in a 10cc syringe w/plunger & tip - SMD291 | 8.6 | Buy On Amazon |
8 | MG Chemicals - 4860P-35G 4860P 63/37 No Clean | 8.4 | Buy On Amazon |
9 | Kester EP256 Solder Paste | 8.4 | Buy On Amazon |
10 | No Clean SnPb Leaded Solder Paste 35 Grams | 8.2 | Buy On Amazon |
Table Of Content:
- Chip Quik SMDLTLFP Solder Paste Sn42/Bi57.6/Ag0.4 No-Clean Lead-Free Low Temperature Melts 138C 281F
- DIY Solder Soldering Paste 10cc Flux Grease RMA223 RMA-223 for Chips Computer Phone LED BGA SMD PGA PCB...
- No Clean Lead Free Solder Paste 15 Grams
- Chip Quik SMD291AX50T3 Solder Paste in jar 50g T3 Sn63/Pb37 no clean
- BGA Activated Rosin Solder Paste Tin Rosin-Based Flux Paste Cream for Soldering Rework Station Circuit...
- MG Chemicals 4902P Sn42Bi57Ag1 Low Temperature Solder Paste T3, NO Clean, 15 Gram Pneumatic Dispenser...
- Chipquik Tack Flux no clean in a 10cc syringe w/plunger & tip SMD291
- MG Chemicals 4860P-35G 4860P 63/37 No Clean, Leaded Solder Paste, 35 g...
- Kester EP256 Solder Paste, No-Clean 63/37, Syringe Dispenser 1
- No Clean SnPb Leaded Solder Paste 35 Grams
1. Chip Quik SMDLTLFP Solder Paste Sn42/Bi57.6/Ag0.4 No-Clean Lead-Free Low Temperature Melts 138C 281F
- Solder Paste
- Lead Free / RoHS
- No Clean
- Syringe
- Low Temprature
2. DIY Solder Soldering Paste 10cc Flux Grease RMA223 RMA-223 for Chips Computer Phone LED BGA SMD PGA PCB Repair Tool
- Reland Sung
3. No Clean Lead Free Solder Paste 15 Grams
- No Clean SAC305 Solder Paste
- T4 new industry standard
- 218C 424F Melting Point (Eutectic)
- Two dispensing tips 16g and 20g
4. Chip Quik SMD291AX50T3 Solder Paste in jar 50g (T3) Sn63/Pb37 no clean
5. BGA Activated Rosin Solder Paste Tin Rosin-Based Flux Paste Cream for Soldering Rework Station Circuit Board PCB BGA SMD Soldering Repair (80g)
- MECHANIC Advanced Paste Flux Soldering for mobile phone motherboard Repair, electric Soldering Iron Welding Fluxes for phone circuit board repair.
- Its boiling point only slightly higher than the melting point of the solder, For mobile phones, PC cards and other sophisticated electronic chip-level help welding.
- High bond strength, PH value neutral, insulation is strong, welding surface smooth, is no corrosive for IC and PCB.
- Wipe the surface of the object before soldering, apply the paste flux to the solder joint, solder the tin to the solder joint with soldering iron.
- Specifications: Model: MECHANIC-UV80; Color: Yellow, Weight: 0.
6. MG Chemicals 4902P Sn42Bi57Ag1 Low Temperature Solder Paste T3
- Low temperature solder paste with non clean flux
- Melting point: 138 °C [280 °F]
- The powder distribution complies with the j-std-005 type 3 (with 80 percent min.
- Store refrigerated between 2–10 °C [35–50 °F] to minimize solvent evaporation, flux separation, and chemical activity.
- Complete dispensing unit
7. Chipquik Tack Flux no clean in a 10cc syringe w/plunger & tip – SMD291
- Remove QFDs, PLCCs, SOICs and chip components without costly equipment
- Use with existing rework equipment or temp controlled soldering irons
- Special removal alloy has excellent wetting ability
- Low melting temperature
- Safe, affordable, easy and won’t damage sensitive components
8. MG Chemicals – 4860P-35G 4860P 63/37 No Clean
- No Clean Flux (Residues are Non-corrosive, Non-conductive)
- Easily Dispensed
- Excellent Wettability
- Ideal for surface mount applications
- Complete dispensing unit
9. Kester EP256 Solder Paste
- Packed as pictured. 8cc syringe contains 35 grams of solder paste
- Kit Includes five 19-gauge dispensing tips (0.033″ inside diameter)
- 63/37 Tin/Lead, the most common for electronics work
- No-clean flux formula