Top 10 Best Oscilloscope Under 500 Reviews For You

Best Oscilloscope Under 500
Hey there!: Some links on this page are affiliate links which means that, if you choose to make a purchase, as an Amazon Associate we earn a small commission at no extra cost to you. We greatly appreciate your support!
NoProductScoreAction
1AUKUYEE Updated 2.4" TFT Digital Oscilloscope Kit with Power Supply and BNC-Clip Cable Probe Q15001 (Assembled Finished Machine)9.8Buy On Amazon
2Oscilloscope Multimeter, LM2020 New Update9.8Buy On Amazon
3Siglent Technologies SDS1202X-E 200 mhz Digital Oscilloscope 2 Channels9.6Buy On Amazon
4ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe (Assembled Finished Machine) EM0019.4Buy On Amazon
5YEAPOOK ADS1014D 2 in 1 Digital Oscilloscope DDS Signal Generator with 2 Channels 100Mhz Bandwidth 1GSa/s Sampling Rate (ADS1014D)9.4Buy On Amazon
62 Channel Oscilloscope ADS1014D9.2Buy On Amazon
7Siglent SDS1104X-E 100Mhz digital oscilloscope 4 channels standard decoder8.8Buy On Amazon
8EspoTek Labrador: Easy-to-Use, Open-Source8.8Buy On Amazon
9YEAPOOK ADS1013D Handheld Digital Tablet oscilloscope Portable Storage Oscilloscope Kit with 2 Channels8.4Buy On Amazon
10ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe8.2Buy On Amazon

Table Of Content:

1. AUKUYEE Updated 2.4″ TFT Digital Oscilloscope Kit with Power Supply and BNC-Clip Cable Probe Q15001 (Assembled Finished Machine)

  • UPGRADED VERSION – The sensitivity of Q15001 has been extended in both directions and is higher and wider.
  • DESIGNING TO YOUR NEEDS – Display and MCU are mounted on the same board (mainboard) to avoid using inter-board pin-headers.
  • ROTARY ENCODER – It has been added the rotary encoder, makes parameter adjustment quicker and easier.
  • ASSEMBLED FINISHED – AUKUYEE Q15001 oscilloscope is an Assembled finished Machine.
  • WHAT YOU GET – You will get an assembled oscilloscope, BNC-clip cable and a power pupply.

2. Oscilloscope Multimeter, LM2020 New Update

  • FASTER SAMPLING SPEED – 2.
  • MORE POWERFUL DETECTION RANGE -DC voltage 0 ~ 1000V, AC voltage 0 ~ 750V, DC/AC Current 0 ~ 10A, Resistance 0 ~ 40MΩ, Capacitance 0 ~ 100μf, Frequency 0 ~ 5MHZ, Diode / Continuity open circuit voltage 1.
  • MORE ACCURACY -Dedicated Chip, the automatic waveform capture function, easy operation.
  • LED BACKLIGHT & STORAGE / READOUT – Analog broadband range up to: D AC ~ 1MHz, Display hold, storage / readout up to 10 waveforms and 100 sets of measurement values.
  • OVERLOAD PROTECTION & MULTI-PURPOSE – Built-in 500mA/10A double protective tube, dual protection of the instrument.

3. Siglent Technologies SDS1202X-E 200 mhz Digital Oscilloscope 2 Channels

  • Country of origin : China
  • Real-time sampling rate up to 1 gsa/use
  • IRecord length up to 14 Mpts
  • Standard serial bus triggering and decode, supports iic, spi, uart, Rs232, can, and lin

4. ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe (Assembled Finished Machine) EM001

  • ASSEMBLED FINISHED: ETEPOPN EM001 digital DIY oscilloscope kit with case is an assembled finished machine No soldering/assembly work needs It can be used directly to avoid assembling /welding process problems and greatly save your time.
  • UPGRADED VERSION: The sensitivity of the EM001 has been extended both in width and height which is wider and higher than the others It reaches 5mV/div – 20V/div while the others is only 10mV/div – 5v/div.
  • HAND-HELD: This updated digital oscilloscope can be hand-held while the others can only be used by placing it on the desktop.
  • ROTARY ENCODER: It has been added the rotary encoder makes parameter adjustment more quicker and easier.
  • WHAT YOU GET: You will get a assembled oscilloscope and BNC-clip cable Detailed Operation instructions troubleshooting guide and schematic are also provided.

5. YEAPOOK ADS1014D 2 in 1 Digital Oscilloscope DDS Signal Generator with 2 Channels 100Mhz Bandwidth 1GSa/s Sampling Rate (ADS1014D)

  • 2 channels, 100 MHz analog bandwidth @ 1 GSa/s Real-time sampling, 240kbit Sample memory depth.
  • Built in DDS Function Signal Generator,14 standard signals (@ 2.
  • It intercept whole or part of the complex signals from the oscilloscope as the output signal of the signal generator.
  • Auto/Normal/Single 3 Trigger modes,it is easy to capture instantaneous waveform.
  • Lissajous figure can be used to compare and judge the amplitude, frequency and phase of two groups of signals.

6. 2 Channel Oscilloscope ADS1014D

  • 7 inches color LCD screen,800*480 resolution, bright color and high contrast.
  • Built-in DDS signal generator, support 12 kinds of functional signals.
  • Equipped with efficient one-button automatic, without tedious adjustment can display the measured waveform, one key to save the waveform.
  • FFT display function, you can analyze the signal spectrum characteristics.
  • Suitable for use in maintenance and research and development industry.

7. Siglent SDS1104X-E 100Mhz digital oscilloscope 4 channels standard decoder

  • 100Mhz, 4 channels, 1Gsa/use, 1Mpts fft
  • Standard decoder: iic, spi, uart/Rs232, can, lin
  • 16 digital channels (mso) (four channel series only, option)
  • USB AWG module(four channel series only, option)
  • USB WIFI adapter(four channel series only, option)
  • NOTE: Refer User guide included along with the product before use

8. EspoTek Labrador: Easy-to-Use

  • Oscilloscope (2 channel, 750ksps)
  • Arbitrary Waveform Generator (2 channel, 1MSPS per channel)
  • Power Supply (4.5 to 15V, 0.75W max output, with closed-loop feedback)
  • Logic Analyzer (2 channel, 3MSPS per channel, with serial decoding)
  • Multimeter (V/I/R/C)

9. YEAPOOK ADS1013D Handheld Digital Tablet oscilloscope Portable Storage Oscilloscope Kit with 2 Channels

  • 2 channels, 100 MHz analog bandwidth @ 1 GSa/s Real-time sampling, 240kbit Sample memory depth.
  • 7” color TFT- LCD touch screen with 800 * 480 resolution.
  • Auto/Normal/Single 3 Trigger modes,it is easy to capture instantaneous waveform.
  • Built-in high-voltage protection module,can tolerate a continuous voltage of up to 400V.
  • ASD1013D is widely applicable in the academic experiment, electronic product design,debugging and maintenance, electronic engineering education, etc.

10. ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe

  • ASSEMBLED FINISHED – ETEPOPN Q15001 digital DIY oscilloscope kit with case is an assembled finished machine.
  • UPGRADED VERSION – The sensitivity of the Q15001 has been extended both in width and height, which is wider and higher than the others.
  • HAND-HELD – This updated digital oscilloscope can be hand-held, while the others can only be used by placing it on the desktop.
  • ROTARY ENCODER – It has been added the rotary encoder, makes parameter adjustment more quicker and easier.
  • WHAT YOU GET – You will get a assembled oscilloscope, BNC-clip cable and a power adapter.

Leave a Comment