Top 10 Best Oscilloscope Under 1000 Reviews With Scores

Best Oscilloscope Under 1000
Hey there!: Some links on this page are affiliate links which means that, if you choose to make a purchase, as an Amazon Associate we earn a small commission at no extra cost to you. We greatly appreciate your support!
NoProductScoreAction
1Oscilloscope Multimeter, LM2020 New Update9.6Buy On Amazon
2Siglent Technologies SDS1202X-E 200 mhz Digital Oscilloscope 2 Channels9.4Buy On Amazon
3ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe (Assembled Finished Machine) EM0019Buy On Amazon
4YEAPOOK ADS1014D 2 in 1 Digital Oscilloscope DDS Signal Generator with 2 Channels 100Mhz Bandwidth 1GSa/s Sampling Rate (ADS1014D)9Buy On Amazon
5AUKUYEE Updated 2.4" TFT Digital Oscilloscope Kit with Power Supply and BNC-Clip Cable Probe Q15001 (Assembled Finished Machine)8.8Buy On Amazon
6Siglent SDS1104X-E 100Mhz digital oscilloscope 4 channels standard decoder8.8Buy On Amazon
7ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe8.8Buy On Amazon
8YEAPOOK ADS1013D Handheld Digital Tablet oscilloscope Portable Storage Oscilloscope Kit with 2 Channels8.6Buy On Amazon
9EspoTek Labrador: Easy-to-Use, Open-Source8.6Buy On Amazon
102 Channel Oscilloscope ADS1014D8.4Buy On Amazon

Table Of Content:

1. Oscilloscope Multimeter, LM2020 New Update

  • FASTER SAMPLING SPEED – 2.
  • MORE POWERFUL DETECTION RANGE -DC voltage 0 ~ 1000V, AC voltage 0 ~ 750V, DC/AC Current 0 ~ 10A, Resistance 0 ~ 40MΩ, Capacitance 0 ~ 100μf, Frequency 0 ~ 5MHZ, Diode / Continuity open circuit voltage 1.
  • MORE ACCURACY -Dedicated Chip, the automatic waveform capture function, easy operation.
  • LED BACKLIGHT & STORAGE / READOUT – Analog broadband range up to: D AC ~ 1MHz, Display hold, storage / readout up to 10 waveforms and 100 sets of measurement values.
  • OVERLOAD PROTECTION & MULTI-PURPOSE – Built-in 500mA/10A double protective tube, dual protection of the instrument.

2. Siglent Technologies SDS1202X-E 200 mhz Digital Oscilloscope 2 Channels

  • Country of origin : China
  • Real-time sampling rate up to 1 gsa/use
  • IRecord length up to 14 Mpts
  • Standard serial bus triggering and decode, supports iic, spi, uart, Rs232, can, and lin

3. ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe (Assembled Finished Machine) EM001

  • ASSEMBLED FINISHED: ETEPOPN EM001 digital DIY oscilloscope kit with case is an assembled finished machine No soldering/assembly work needs It can be used directly to avoid assembling /welding process problems and greatly save your time.
  • UPGRADED VERSION: The sensitivity of the EM001 has been extended both in width and height which is wider and higher than the others It reaches 5mV/div – 20V/div while the others is only 10mV/div – 5v/div.
  • HAND-HELD: This updated digital oscilloscope can be hand-held while the others can only be used by placing it on the desktop.
  • ROTARY ENCODER: It has been added the rotary encoder makes parameter adjustment more quicker and easier.
  • WHAT YOU GET: You will get a assembled oscilloscope and BNC-clip cable Detailed Operation instructions troubleshooting guide and schematic are also provided.

4. YEAPOOK ADS1014D 2 in 1 Digital Oscilloscope DDS Signal Generator with 2 Channels 100Mhz Bandwidth 1GSa/s Sampling Rate (ADS1014D)

  • 2 channels, 100 MHz analog bandwidth @ 1 GSa/s Real-time sampling, 240kbit Sample memory depth.
  • Built in DDS Function Signal Generator,14 standard signals (@ 2.
  • It intercept whole or part of the complex signals from the oscilloscope as the output signal of the signal generator.
  • Auto/Normal/Single 3 Trigger modes,it is easy to capture instantaneous waveform.
  • Lissajous figure can be used to compare and judge the amplitude, frequency and phase of two groups of signals.

5. AUKUYEE Updated 2.4″ TFT Digital Oscilloscope Kit with Power Supply and BNC-Clip Cable Probe Q15001 (Assembled Finished Machine)

  • UPGRADED VERSION – The sensitivity of Q15001 has been extended in both directions and is higher and wider.
  • DESIGNING TO YOUR NEEDS – Display and MCU are mounted on the same board (mainboard) to avoid using inter-board pin-headers.
  • ROTARY ENCODER – It has been added the rotary encoder, makes parameter adjustment quicker and easier.
  • ASSEMBLED FINISHED – AUKUYEE Q15001 oscilloscope is an Assembled finished Machine.
  • WHAT YOU GET – You will get an assembled oscilloscope, BNC-clip cable and a power pupply.

6. Siglent SDS1104X-E 100Mhz digital oscilloscope 4 channels standard decoder

  • 100Mhz, 4 channels, 1Gsa/use, 1Mpts fft
  • Standard decoder: iic, spi, uart/Rs232, can, lin
  • 16 digital channels (mso) (four channel series only, option)
  • USB AWG module(four channel series only, option)
  • USB WIFI adapter(four channel series only, option)
  • NOTE: Refer User guide included along with the product before use

7. ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe

  • ASSEMBLED FINISHED – ETEPOPN Q15001 digital DIY oscilloscope kit with case is an assembled finished machine.
  • UPGRADED VERSION – The sensitivity of the Q15001 has been extended both in width and height, which is wider and higher than the others.
  • HAND-HELD – This updated digital oscilloscope can be hand-held, while the others can only be used by placing it on the desktop.
  • ROTARY ENCODER – It has been added the rotary encoder, makes parameter adjustment more quicker and easier.
  • WHAT YOU GET – You will get a assembled oscilloscope, BNC-clip cable and a power adapter.

8. YEAPOOK ADS1013D Handheld Digital Tablet oscilloscope Portable Storage Oscilloscope Kit with 2 Channels

  • 2 channels, 100 MHz analog bandwidth @ 1 GSa/s Real-time sampling, 240kbit Sample memory depth.
  • 7” color TFT- LCD touch screen with 800 * 480 resolution.
  • Auto/Normal/Single 3 Trigger modes,it is easy to capture instantaneous waveform.
  • Built-in high-voltage protection module,can tolerate a continuous voltage of up to 400V.
  • ASD1013D is widely applicable in the academic experiment, electronic product design,debugging and maintenance, electronic engineering education, etc.

9. EspoTek Labrador: Easy-to-Use

  • Oscilloscope (2 channel, 750ksps)
  • Arbitrary Waveform Generator (2 channel, 1MSPS per channel)
  • Power Supply (4.5 to 15V, 0.75W max output, with closed-loop feedback)
  • Logic Analyzer (2 channel, 3MSPS per channel, with serial decoding)
  • Multimeter (V/I/R/C)

10. 2 Channel Oscilloscope ADS1014D

  • 7 inches color LCD screen,800*480 resolution, bright color and high contrast.
  • Built-in DDS signal generator, support 12 kinds of functional signals.
  • Equipped with efficient one-button automatic, without tedious adjustment can display the measured waveform, one key to save the waveform.
  • FFT display function, you can analyze the signal spectrum characteristics.
  • Suitable for use in maintenance and research and development industry.

Leave a Comment