Top 10 Best Mini Heat Gun For Shrink Tubing With Expert Recommendation

Best Mini Heat Gun For Shrink Tubing
Hey there!: Some links on this page are affiliate links which means that, if you choose to make a purchase, as an Amazon Associate we earn a small commission at no extra cost to you. We greatly appreciate your support!
NoProductScoreAction
16.56FT Long Heat Gun9.6Buy On Amazon
2Heat Gun for Crafts9.4Buy On Amazon
33:1 Dual Wall Adhesive Lined Heat Shrink Tubing Kit + Mini Heat Gun for Shrink Tubing Shrink Wrapping – Waterproof Marine Heat Shrink Tubing for Wire Shrink Wrap Repair Insulation Protector by Rocsuk9.4Buy On Amazon
4Mini Heat Gun, 350W 662°F Tiny Hot Air Gun Kit with Reflector Nozzle and Heat Shrink Tubing for Wire Connectors9Buy On Amazon
5FloweryOcean Mini Heat Gun for Shrink Wrapping8.8Buy On Amazon
6Heat Shrink Tubing Kit8.8Buy On Amazon
7Mini Heat Gun, Portable Mini Handheld Hot Air Gun for DIY Craft Embossing Shrink Wrapping PVC8.8Buy On Amazon
8Mini Heat Gun,Dual-Temperature 350W Portable Hot Air Gun with Reflector Nozzle and Heat Shrink Tubing for Epoxy Resin,Crafts,embossing,Shrink Wrap8.6Buy On Amazon
9Craft Heat Gun for Crafts 2 Speed Small Heat Gun for Resin and 300W Mini Art Torch Tool for Polymer Clay Dryer Candle Making Shrink Tubing Embossing Epoxy Painting Tumblers Crafts Bubble Buster8.6Buy On Amazon
10Wagner Spraytech 0503038 HT400 Heat Gun8.4Buy On Amazon

Table Of Content:

1. 6.56FT Long Heat Gun

  • Long Cable Enough for Crafting : 6.
  • Suitable for:This excellent compact heat gun can be used for heating shrinkable film, embossed powder,rubber stamp.
  • Voltage&Cooling Holes:Voltage 110V, the temp of the nozzle could reach to 200° in seconds.
  • DIY Essentials Part : If you like DIY, this is a good accessory for you.
  • Warm Tips:The temp of the nozzle could reach to 200°in seconds,please don’t use it more than 10 minutes in one time, just turn off then turn on for working continuously.

2. Heat Gun for Crafts

  • Variable Speed / Heat Settings: The only one of its kind, our heat gun combines a low speed/heat setting for delicate or detail work, with a high speed/heat setting for heavy-duty or high-volume work, all in a compact easy to handle package.
  • Versatile: Perfect for crafts, automotive, electronics, embossing powders, vinyl wrap, HTV, epoxy resin, shrink wrapping, shrink tubing, shrink tube connectors, decals, wine bottle shrink capsules, EVA foam, transfers, acrylic, shrink film, cell phone repair, tablet repair, screen repair, soldering, jewelry making, wire connectors, butt connectors, wax, beeswax, soy, candle making, and more!.
  • Insulated – Ergonomic – Light Weight – Quiet: cheap mini heat guns get too hot to hold.
  • UL-Certified – Be careful! Poor-quality heat guns are both a fire hazard & an electrical shock hazard! Most generic heat guns are not manufactured to North American safety standards & are not safety certified.
  • Proud Global Company – Launched in a small LA loft, we now have team members and factories spanning the globe.

3. 3:1 Dual Wall Adhesive Lined Heat Shrink Tubing Kit + Mini Heat Gun for Shrink Tubing Shrink Wrapping – Waterproof Marine Heat Shrink Tubing for Wire Shrink Wrap Repair Insulation Protector by Rocsuk

  • 180pcs good quality heat shrink tube, There are 6 colors of red, black, blue, white, yellow, and green, and 7 sizes in the portable box.
  • The heat shrink tubing is made of cross-linked polyolefin, 3:1 shrink ratio rating,The wall thickness is very thick,It has the glue inside, that oozes out when you heat it up to shrink it and forms a tight seal.
  • The heat shrink tubing has excellent flame retardant, insulation, acid and alkali resistance, high temperature resistance, anti-aging, and durability,Environmental protection meets RoHS standards, Great for marine use, boats, trailers, Wire and cable connection insulation repair, electronic data line protection, daily electronic and electrical maintenance ,etc.
  • The air outlet of the hot air gun is made of stainless steel, which Will not be damaged by high temperature.
  • The heat gun has a fast heating speed, the highest temperature can reach 200℃, and it is easy to realize the heat shrinkable tube wrapping.

4. Mini Heat Gun

  • HIGH QUALITY & SAFER: Built in over-heat protection, if the temperature is overheated, the curent of this electric heat gun tool will be cut off automatically to avoid melting and fire.
  • ERGONOMIC DESIGN: Pencil-like design and weight just over a pound let this small heat embossing gun fit comfortably in your hand.
  • EFFICIENT & CONVENIENT: Professional mini heat gun with 3.
  • VERSATILE APPLICATION: It is good choice to use this heat gun for shrink wrapping, soldering, paint and mud removing, candle making, electronics repairing, watercolor drawing drying, defrosting and air bubble remover for acrylic resin cups, there are tons of other ways you can use it.
  • WHAT YOU GET: 1pc 350W mini heat gun for crafts, 1pc spoon reflector nozzle, 1pc additional replaceable protection cap, 40pcs heat shrink tubes, 1pc instruction manual, 7×24 customer service and 2 years quality guaranty.

5. FloweryOcean Mini Heat Gun for Shrink Wrapping

  • Unique Heat Shrink Set: Containing 328pc Heat Shrink Tubing and a 24 cm Heat Gun.
  • Various sizes of heat-shrink tubing: The ultra-large capacity 328pcs kit contains 1 mm, 2 mm, 3 mm, 4 mm, 6 mm, 8 mm, 10 mm, 14 mm, heat shrink tubing in various sizes to meet your different needs.
  • Professional Grade Tubing: All heat-shrink tubing are professional tubing.
  • This Heat Gun Professional for Plastic Pipe: This hot air tool has an operating temperature of 200 degrees Celsius(392℉).
  • Two Vents on Both Side: This hot air gun is designed with two vents on both sides, which can better dissipate heat, reduce damage and extend the service life of the air gun.

6. Heat Shrink Tubing Kit

  • 328Pcs Heat Shrink Tube Shrinkage – It is 2:1 heat shrink ratio, and will shrink up to 1/2 of original, just use the mini heat gun heating for it 5 second.
  • High-quality heat gun: The hot air gun has two heat dissipation ports, and the service life can reach more than 5 years.
  • Eight sizes high-quality heat shrink tubing for your choose, they can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc.
  • Product parameters] Heat gun :The length is 22 cm, which can produce high temperature of 200 degrees Celsius, and the US plug.
  • Product warranty:] The heat gun can be used for five years.

7. Mini Heat Gun

  • Easy to use, Just keep 5-6cm distance from your amazing work and to heat it at about a 45 degree angle until completed.
  • Made of high quality ABS plastic outside and stainless steel inside, lightweight, simple and durable.
  • Handing part adopts salient point nonskid designs that cause safe handholding with small energizing.
  • The temprature can not be adjusted, but it can reach at about 200°C/390°F within a few seconds abstractly which heat up quickly and works like a charm.
  • Packing details: 1*Hot Air Gun, 1*Detailed Instructions, 1*Additional replaceable protecting cap (accessories).

8. Mini Heat Gun,Dual-Temperature 350W Portable Hot Air Gun with Reflector Nozzle and Heat Shrink Tubing for Epoxy Resin,Crafts,embossing,Shrink Wrap

  • Advanced dual temperature setting】: Mini hot air gun can switch between two different temperatures freely through the button to ensure that this hot air gun can be adjusted to meet all your needs.
  • Strong power】The heat shrinkable gun provides up to (450 ° C) Heat, high power, fast and efficient.
  • Safety&Durable】Safety CE, ROHS certification heating gun, with 3C certification line / plug, ease of use, design and upgrade of high thermal conductivity mica material, better heat sink.
  • Portable and flexible application】This lightweight heat gun is designed with anti-skid protruding points to reduce grip fatigue.
  • Should be widely used】The resin hot air gun includes a centralized nozzle for guiding high heat flow to the working surface, which is very suitable for crafts,epoxy resin,shrink tubingembossing,shrink wrap, vinyl, phone repair,electronics DIY,bent PVC pipe, paint removal, loosening rusted bolts and other dry and thawing purposes.

9. Craft Heat Gun for Crafts 2 Speed Small Heat Gun for Resin and 300W Mini Art Torch Tool for Polymer Clay Dryer Candle Making Shrink Tubing Embossing Epoxy Painting Tumblers Crafts Bubble Buster

  • DUAL TEMPERATURE: Our premium quality crafts and heat gun for epoxy resin will help you take your art to the next level! This versatile heat tool heats up to 100°F on low power and 200°F on high, and it heats up in seconds.
  • PORTABLE YET POWERFUL: Our craft gun is compact making it easy to hold and control yet is extremely powerful with the dual-temperatures settings reaching 100°F / 200°F.
  • BUILT-IN STAINLESS-STEEL STAND: This durable yet lightweight epoxy gun includes a built-in stand that helps to prevent surface burns while heating up or turning off the craft heat gun.
  • PERFECT FOR EPOXY & MORE: Our dual-temp heat tool for crafts is great for all sorts of epoxy resin projects, like glitter tumblers and coasters or larger works of art like table tops and wall art.
  • WHY CHOOSE HIPPIE CRAFTER: We are a family owned American small business committed to producing professional grade art supplies designed for our fellow free-spirited crafters.

10. Wagner Spraytech 0503038 HT400 Heat Gun

  • DUAL TEMPERATURE HEAT GUN: The HT400 heat tool is a durable, versatile heat gun for home, workshop, craft and hobby projects.
  • HANDS FREE FEATURE: Use the installed, retractable stand for hands free operation to easily complete all of your household heating and crafting projects.
  • MANY PROJECT USES: The Wagner heat embossing gun can be used to apply heat shrink tubing around wire, emboss cards and crafting projects, remove stickers, shrink wrap presents, make jewelry and more.
  • COMPACT DESIGN: The unique angled design offers three operating positions (palm, pencil and hands free), ensuring the best fit and feel for your project.
  • SAFE AND CUSTOMER CENTRIC: Wagner has been in the business for 50+ years and puts safety first, which is why our products are ETL Listed.

Leave a Comment