Hey there!: Some links on this page are affiliate links which means that, if you choose to make a purchase, as an Amazon Associate we earn a small commission at no extra cost to you. We greatly appreciate your support!
| No | Product | Score | Action |
|---|---|---|---|
| 1 | ELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE | 9.8 | Buy On Amazon |
| 2 | Verilog by Example: A Concise Introduction for FPGA Design | 9.8 | Buy On Amazon |
| 3 | ALINX AX7A035: Artix-7 XC7A35T (FPGA Development Board + USB Downloader) | 9.2 | Buy On Amazon |
| 4 | Canon EOS Rebel T7 DSLR Camera with 18-55mm Lens - Built-in Wi-Fi - 24.1 MP CMOS Sensor - DIGIC 4+ Image Processor and Full HD Videos | 9.2 | Buy On Amazon |
| 5 | RHS Research Litefury Xilinx Artix-7 FPGA M.2 Development Board | 9 | Buy On Amazon |
| 6 | Designing Video Game Hardware in Verilog | 9 | Buy On Amazon |
| 7 | ELEGOO 32 Pcs Double Sided PCB Board Prototype Kit for DIY Soldering with 5 Sizes Compatible with Arduino Kits | 9 | Buy On Amazon |
| 8 | Build Your Own Computer: From Scratch (From Scratch Series) | 8.8 | Buy On Amazon |
| 9 | Practical Electronics for Inventors | 8.6 | Buy On Amazon |
| 10 | Alchitry Io Element Board - get Your feet Wet with Digital Design- Features 4 7-Segments LEDs 5 momentary Push Buttons 24 Basic LEDs 24 DIP switches Use for Beginners of FPGAs | 8.4 | Buy On Amazon |
Table Of Content:
- ELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE
- Verilog by Example: A Concise Introduction for FPGA Design
- ALINX AX7A035: Artix-7 XC7A35T FPGA Development Board + USB Downloader
- Canon EOS Rebel T7 DSLR Camera with 18-55mm Lens | Built-in Wi-Fi | 24.1 MP CMOS Sensor | DIGIC 4+ Image...
- RHS Research Litefury Xilinx Artix-7 FPGA M.2 Development Board
- Designing Video Game Hardware in Verilog
- ELEGOO 32 Pcs Double Sided PCB Board Prototype Kit for DIY Soldering with 5 Sizes Compatible with Arduino...
- Build Your Own Computer: From Scratch From Scratch Series
- Practical Electronics for Inventors, Fourth Edition
- Alchitry Io Element Board get Your feet Wet with Digital Design- Features 4 7-Segments LEDs 5 momentary...
1. ELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE
- Free PDF tutorial(more than 22 lessons) and clear listing in a nice package
- The most economical kit based on Arduino platform to starting programming for those beginners who are interested.
- Lcd1602 module with pin header (not need to be soldered by yourself)
- This is the upgraded starter kits with power supply module, 9V battery with dc
- High quality kit with UNO R3. 100% compatible with Arduino UNO R3, MEGA 2560 R3, NANO.
2. Verilog by Example: A Concise Introduction for FPGA Design
- Used Book in Good Condition
3. ALINX AX7A035: Artix-7 XC7A35T (FPGA Development Board + USB Downloader)
- Used for PCIe solution verification Video Image Processing SFP/Gigabit Ethernet Communication
- Featured Xilinx Artix-7 XC7A35T-2FBG484I8Gbit DDR3 SDRAM (2 pieces of 4Gbit) up to 400MHz / 800Mbps 32bit bus QSPI Flash: 128Mbit.
- 1-port 10/100/1000 Mbps Ethernet (RGMII), Tri-Speed Ethernet PHY 2 x SFP/SFP+ Module Connectors PCI Express 2-lane edge connector USB-to-UART Bridge Connector HDMI Input Output 1080P.
- Two 40-pin connectors, expansion opportunities with ALINX Module, such as AD/DA data acquisition module, camera and LCD module.
- Designed and manufactured by ALINX, that is XILINX Alliance Member in china.
4. Canon EOS Rebel T7 DSLR Camera with 18-55mm Lens - Built-in Wi-Fi - 24.1 MP CMOS Sensor - DIGIC 4+ Image Processor and Full HD Videos
- 24.1 Megapixel CMOS (APS-C) sensor with is 100–6400 (H: 12800)
- Built-in Wi-Fi and NFC technology
- 9-Point AF system and AI Servo AF
- Optical Viewfinder with approx 95% viewing coverage
- Use the EOS Utility Webcam Beta Software (Mac and Windows) to turn your compatible Canon camera into a high-quality webcam.
5. RHS Research Litefury Xilinx Artix-7 FPGA M.2 Development Board
- Xilinx XC7A100T-L2FGG484E FPGA
- 256MB DDR3-800
- 128Mb configuration flash
- PCIe x4 gen 2
- M.2 2280 Key M (same as SSD NVMe)
6. Designing Video Game Hardware in Verilog
7. ELEGOO 32 Pcs Double Sided PCB Board Prototype Kit for DIY Soldering with 5 Sizes Compatible with Arduino Kits
- 32 pieces double sided PCB prototype boards well packed in a plastic tray which is very easy to store and take out.
- 5 different size boards to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects.
- 4 mounting holes at the corners of the board are very convenient for installing them together.
- Pre-tinned plated holes on the board make it very handy to solder components and sensors for your projects.
- High quality of durable glass fiber –FR4 material with 1.
8. Build Your Own Computer: From Scratch (From Scratch Series)
10. Alchitry Io Element Board – get Your feet Wet with Digital Design- Features 4 7-Segments LEDs 5 momentary Push Buttons 24 Basic LEDs 24 DIP switches Use for Beginners of FPGAs
- Fantastic beginner add on board to walk your through the basics of FPGA
- Includes: 4x 7-segment LED digits, 5x momentary push buttons, 24x LEDs, and 24x DIP switches
- Expansion board similar to shields or HATs but these are meant for your Au and Cu FPGA Development Boards.
- This Element is equipped with four connectors on the underside of the board that snap to an Au or Cu board.
- Be aware that the Io does not feature any connection points on the top of the board so you won’t be able to stack any additional Elements on top of it.