![Top 10 Best Cutting Fluid For Aluminum In [2022] Best Cutting Fluid For Aluminum](https://aidbird.com/wp-content/uploads/imga-media/1625.jpg)
Hey there!: Some links on this page are affiliate links which means that, if you choose to make a purchase, as an Amazon Associate we earn a small commission at no extra cost to you. We greatly appreciate your support!
No | Product | Score | Action |
---|---|---|---|
1 | A9 04z-A-9 4 Oz Aluminum Cutting Fluid | 9.8 | Buy On Amazon |
2 | Tap Magic 30004P ProTap Cutting Fluid | 9.6 | Buy On Amazon |
3 | Tap Magic Aluminum Cutting Fluid with Spout Top | 9.2 | Buy On Amazon |
4 | TAP Magic 10016E EP-XTRAOZ ONE Friendly Cutting FLUIDS - 16 OZ. SPOUT TOP | 9 | Buy On Amazon |
5 | Tap Magic 20128A Aluminum, 1 gal | 9 | Buy On Amazon |
6 | Tap Magic 20016A Aluminum Fluid with Spout Top | 8.8 | Buy On Amazon |
7 | TRIM Cutting & Grinding Fluids MIST/1G Synthetic Misting Fluid | 8.6 | Buy On Amazon |
8 | Relton A9 1 Pint Can Environment Friendly Aluminum-Cutting Tapping Fluid | 8.4 | Buy On Amazon |
9 | Forney 20857 Tap Magic Industrial Pro Cutting Fluid | 8.2 | Buy On Amazon |
10 | TRIM Cutting & Grinding Fluids OM303/1 Nonchlorinated Cutting and Lubricating Oil | 8.2 | Buy On Amazon |
- Best Lubricant For Milling Aluminum
- Best Mini Heat Gun For Shrink Tubing
- Best Solder Flux For Electronics
Table Of Content:
- A9 04z-A-9 4 Oz Aluminum Cutting Fluid
- Tap Magic 30004P ProTap Cutting Fluid, 4 oz. Size
- Tap Magic Aluminum Cutting Fluid with Spout Top, 20016A, 16 oz, Light Yellow Pack of 1
- TAP Magic 10016E EP-XTRAOZ ONE Friendly Cutting FLUIDS 16 OZ. SPOUT TOP
- Tap Magic 20128A Aluminum, 1 gal
- Tap Magic 20016A Aluminum Fluid with Spout Top, 16 oz, Light Yellow Pack of 1
- TRIM Cutting & Grinding Fluids MIST/1G Synthetic Misting Fluid, 1 gal Jug
- Relton A9 1 Pint Can Environment Friendly Aluminum-Cutting Tapping Fluid
- Forney 20857 Tap Magic Industrial Pro Cutting Fluid, 4 oz
- TRIM Cutting & Grinding Fluids OM303/1 Nonchlorinated Cutting and Lubricating Oil, 1 gal Jug
2. Tap Magic 30004P ProTap Cutting Fluid
- Use for drilling, tapping, milling – any cut on any metal when a biodegradable cutting fluid is called for in your environment.
- Highly effective for hard metals such as stainless steel.
- Dissipates heat rapidly and provides closer tolerances
- Yields an ultra-fine finish and promotes longer tool life
3. Tap Magic Aluminum Cutting Fluid with Spout Top
- Use for any and all cutting operations on aluminum
- Yields a beautiful micro-fine finish
- Ozone-friendly and completely free of 1,1,1 trichloroethane
- This Cutting Fluid Dissipates heat rapidly and provides closer tolerances
- Also highly effective on magnesium and other nonferrous metals
4. TAP Magic 10016E EP-XTRAOZ ONE Friendly Cutting FLUIDS – 16 OZ. SPOUT TOP
- Made in USA
- 16 oz. Bottle
- Highly effective for drilling, tapping, milling – all cuts on all metals.
- This is the fluid to have when you don’t know what cut or what metal tomorrow may bring.
- TAP MAGIC with EP-XTRA Cutting Fluid
5. Tap Magic 20128A Aluminum
- Use for any and all cutting operations on aluminum: tapping, milling, drilling, threading, sawing, turning, boring…you name it.
- Yields a beautiful micro-fine finish. Promotes longer tool life
- Ozone-friendly and completely free of 1, 1, 1 trichloroethane
- Dissipates heat rapidly and provides closer tolerances
- Also highly effective on magnesium and other nonferrous metals
6. Tap Magic 20016A Aluminum Fluid with Spout Top
- Use for any and all cutting operations on aluminum
- Yields a beautiful micro-fine finish
- Ozone-friendly and completely free of 1,1,1 trichloroethane
- Dissipates heat rapidly and provides closer tolerances
- Also highly effective on magnesium and other nonferrous metals
7. TRIM Cutting & Grinding Fluids MIST/1G Synthetic Misting Fluid
- Provides rapid and effective cooling
- Keeps grinding wheels clean and free of loading
- Has superior anti-weld action to control built-up edge and chip welding
- Compatible with all ferrous and most nonferrous materials
- Compatible with most nonmetallic materials
8. Relton A9 1 Pint Can Environment Friendly Aluminum-Cutting Tapping Fluid
- Eases all operations on aluminum: milling, broaching, drilling, threading, tapping, reaming, sawing, etc.
- Contains anti-mist component for a healthier work environment
- Contains a scientific blend of chemicals that attach themselves to aluminum surfaces, forming an extreme-pressure boundary lubricant between tool and work surface.
9. Forney 20857 Tap Magic Industrial Pro Cutting Fluid
- Non-Spray cutting fluid
- Use for tapping, threading, drilling and reaming
- Use on ferrous metals and non-ferrous alloys
- Apply directly on the work surface
- Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!.
10. TRIM Cutting & Grinding Fluids OM303/1 Nonchlorinated Cutting and Lubricating Oil
- Very light colored and clean running
- Low-foaming and low-misting for use in aggressive operations
- Oxidation inhibited for longer life, and an excellent choice where both ferrous and aluminum or copper alloy parts are being machined aggressively.
- Far easier to wash off parts than many oils of similar or even lower performance
- Has replaced dark, heavy-active sulfur/chlorine straight oils in several large operations while providing superior results in tool life.